Robust,low haze and graded porous anti-reflective glass by Tailoring the Nanostructures

Low haze and anti-reflective glass has high potential applications in automobile and optoelectronic fields. Etching is a novel and effective method to fabricate gradient refractive index anti-reflective layer on glass surface. However, the gradient layer on glass surface prepared by the etching method usually characterizes rough porous structure, and the structural defect results in high haze and low abrasion resistance to restrict its applications. In this paper, a hydrothermal etching method has been explored to prepare anti-reflective glass. It has demonstrated to be a new and facile method successfully to tailor the porous nanostructure of gradient refractive index layer and largely decrease the haze of the glass, by adding complex compound in the etching solution. Compared with the etching solution containing NaOH, adding the complex compound of C₆H₅Na₃O₇ in the etching solution has the advantage to overcome the defects. The grain diameter of the graded porous anti-reflective film decreases from ~63 nm to ~18 nm, the etched film thickness increases from 0.44 μm to 1.55 μm, the haze decreases drastically from 23.76% to 1.00%, the reflectivity decreases from 5.88% to 1.08% and the abrasion resistance greatly increases. However, when changing the complex compound from C₆H₅Na₃O₇ to Na₂HPO₄, the haze is 23.44% and has no effect on decreasing haze. Structural characterizations show that the grain size in the porous gradient layer can be easily tailored by changing the ion radius of complex anion in the etching solution, and the optical properties can be controlled. The paper provides new insights into the nanostructures and the preparation approach of anti-reflective glass.     

卫星激光通信粗跟踪系统复合控制策略

针对卫星激光通信粗跟踪系统的跟踪稳定精度指标要求高的特点,建立了基于永磁同步电机直接驱动的粗跟踪系统模型并进行了跟踪稳定误差分析。在采用传统PID控制策略存在跟踪误差较大、动态性能较差等不足的基础上,提出了一种基于粗跟踪系统的改进型前馈复合控制策略。从理论上分析了前馈复合控制策略提高了粗跟踪系统的动态性能,为降低跟踪稳定误差提供了改善方案。地面实验验证结果表明,与传统控制策略相比,改进型复合控制策略极大地降低了系统的动态跟踪误差,动态跟踪误差由606μrad降低至13μrad(1δ)。进一步的在轨实验也验证了改进型复合控制策略的合理性和先进性,总体指标满足了卫星激光通信终端的极高精度要求。本文所提出的控制策略对其他高性能跟踪伺服系统设计也具有较大的借鉴意义。     

巨型工程机械子午线轮胎高强度、低生热胎面基部胶配方开发

通过对国外知名品牌37.00R57和40.00R57规格巨型工程机械子午线轮胎胎面基部胶组成分析和物理性能测试,对我公司巨型工程机械子午线轮胎胎面基部胶配方进行优化设计。新开发配方半成品和成品胶料动态损耗因子分别降低37.9%和26.6%,胶料物理性能达到竞品水平,成品轮胎TKPH提升13.6%。     

LLM-105/CL-20基高能钝感PBX的制备与性能表征

为满足含能材料高能钝感的要求,以CL-20为主体炸药,LLM-105为钝感剂,采用溶液水悬浮法制备了LLM-105质量分数分别为10%、20%、30%的3种LLM-105/CL-20基PBX。通过扫描电子显微镜(SEM)、粉末X射线衍射仪(PXRD)和差示扫描量热仪(DSC)对样品的形貌、晶体结构和热性能进行表征,并测试其机械感度;采用EXPLO5软件计算了其爆轰参数。结果表明,LLM-105/CL-20基PBX样品呈类球形,颗粒密实,粒径约为500μm;PBX中各组分的晶体结构未发生改变;3种配方的热安定性都较好,且随着钝感剂LLM-105含量的增加,LLM-105/CL-20基PBX的热爆炸临界温度呈递增趋势;与原料CL-20相比,3种LLM-105/CL-20基PBX的特性落高分别提高了25.88、33.68、37.18 cm,摩擦爆炸概率分别下降29%、38%、45%;LLM-105质量分数为10%的LLM-105/CL-20基PBX的特性落高与PBX-9501相当,而LLM-105质量分数为20%和30%的LLM-105/CL-20基PBX分别比PBX-9501高16.6%和25.12%;理论爆速分别高381.76、279.2、82.03 m/s。3种配方LLM-105/CL-20基PBX炸药的爆轰性能明显优于PBX-9501。     

在线超低温预浓缩-全二维气相色谱-飞行时间质谱联用系统在大气挥发性有机物监测中的应用

采用自主研制的在线超低温预浓缩设备，连续在线采集大气样品或者连续采集苏玛罐离线样品，对样品进行超低温捕集浓缩和二次超低温冷冻聚焦，采用全二维气相色谱-飞行时间质谱联用技术分离检测浓缩后的挥发性有机物，实现对大气中C2~C12共100多种挥发性有机物的浓缩富集和定性定量分析。本研究对该方法的线性、重复性、加标回收率、检出限等性能进行表征，并与常规一维气相色谱-四极杆质谱联用系统的定性定量结果进行比较。结果表明，该方法不仅满足大气中挥发性有机物检测的性能指标要求，且组分定性定量的准确性、灵敏度等指标均优于一维气相色谱-四极杆质谱联用技术，在挥发性有机物成分较复杂的大气样品检测中具有明显优势。     

抗硫化返原剂PK900在全地形轮胎胎面胶中的应用

研究抗硫化返原剂PK900在全地形轮胎胎面胶中的应用。结果表明:在全地形轮胎胎面胶中添加抗硫化返原剂PK900,胶料硫化速度变化不大,抗硫化返原性能提高,在过硫条件下硫化胶可保持较好的物理性能;成品轮胎的耐久性能提高,使用寿命延长。     

Core–shell type multi‐arm azide polymers based on hyperbranched copolyether as potential energetic materials in solid propellants

A series of novel multi‐arm azide copolymers (POGs) with the same hyperbranched poly[3‐ethyl‐3‐(hydroxymethyl)oxetane] core (PEHO‐c) and different content of linear glycidyl azide polymer shell (GAP‐s) have been synthesized by sequential cationic ring‐opening polymerization and azidation. Detailed structural information of these copolyethers was deduced from Fourier transform infrared, ¹H NMR and inverse gated decoupled ¹³C NMR spectroscopies, matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry, gel permeation chromatography and elemental analysis. The molecular weight of POG having GAP‐s and PEHO‐c with a molar ratio 14.95:1 (R_s/c) was around 31 000 g mol^?1, far above that of linear GAP (around 4000 g mol^?1). The apparent viscosity and glass transition temperature (?51 to ?23 °C) decreased first and then slightly increased with increasing molecular weight. Thermal analysis revealed that all the obtained POGs exhibited excellent resistance to thermal decomposition up to 220 °C. Moreover, the energetic properties, investigated using oxygen bomb calorimetric measurements, indicated that the enthalpy of formation of the POGs was higher than that of general linear GAP, but similar to that of branched GAP under reasonable R_s/c. The compatibilities of the POGs with common materials used in solid propellants were studied using differential scanning calorimetry and the results indicated that the POGs had good compatibility with these materials. © 2017 Society of Chemical Industry     

带延迟索赔和随机收入的离散风险模型的Gerber-Shiu分析（英）

破产理论是保险数学中的重要问题，它可以为保险公司决策者提供一个非常有用的早期风险预警手段．本文研究了一个带潜在延迟索赔和随机保费收入的复合二项风险模型．利用矩母函数的技巧，得到了 Gerber-Shiu 期望折罚函数的递推公式．特别地，还得到了贴现因子为 1 的特殊情形下的 Gerber-Shiu 期望折罚函数的解析表达式．最后还得到了实际应用中的一些重要的破产特征量，包括破产概率，破产时赤字的密度函数，破产前盈余与破产时赤字的联合密度函数，以及导致破产的索赔密度函数等．     

不同有机物对硝酸盐氮测试的影响

研究了红糖、葡萄糖、乙酸钠、甲醇、乙醇、乙酸、丙酸、丁酸、正戊酸、混合有机溶剂等10种不同有机物对麝香草酚光谱法和离子色谱法测试硝酸盐氮的影响。结果表明,溶液中含有红糖或葡萄糖时,均会对麝香草酚法测试硝酸盐氮造成影响,使得测试结果偏大;在无硝酸根离子存在时,红糖和葡萄糖的质量浓度与硝酸盐氮的测试浓度非线性相关;而乙酸钠、甲醇、乙醇、乙酸、丙酸、丁酸、正戊酸和混合有机溶剂则对麝香草酚法测试硝酸盐氮没有影响。实验发现,红糖和葡萄糖在浓硫酸的作用下与麝香草酚发生Molisch反应,形成有色复合物和红棕色不溶性沉淀。实验采用离子色谱法测试硝酸盐氮时,红糖和葡萄糖等糖类有机物对测试结果均无影响。